I-PRO COA – 1000

This additive is for regular mineral oil-based soluble oils. manufactured from bio-resistant and bio-stable emulsifiers. fortified with anti-rust, anti-corrosion, anti-foam, EP additives, antioxidants, and metal deactivators. free from chlorine, sulphur, nitrites, heavy metals like zinc, mercury, lead, barium metals, phenols, and other forms of dioxins. Non-irritating to skin and eyes

Blending RatioBlend
Emulsifier additive20%
Mineral oil80%
  • Suitable mineral oils: Gp.1 SN-70 or 50% mix of Gp. II SN 70 and Gp.1 SN 150. or refined used Transformer oil
  • The PH of the emulsifier is 9 to 9.2
  • PH of the emulsion in 1:20 parts D.M water = 7.2 ± 0.2
  • Emulsion stability in hard water = up to 800 ppm water hardness

I-PRO COA – 2000

Ester-based semi-synthetic additive for water-soluble metalworking fluids. manufactured from bio-resistant and bio-stable emulsifiers. Fortified with high-performance multi-functional additives High EP properties are achieved with complex esters without chlorine or sulfurized oils. Free from formaldehyde-releasing agents. It contains boron and secondary amines within permitted levels and is considered to be safe as per EU standard advisories issued as of date.

Blending RatioBlend 1Blend 2
Emulsifier additives30%30%
Mineral oil40%30%
DM water30%40%
  • Suitable oil SN 70 or Gp.1 SN 150 Or a mix of both oils
  • Emulsion: transparent microemulsion
  • The PH of the emulsifier is 10.5 ± 0.5.
  • The PH of the emulsion in 1:20 parts D.M water = 10 ± 0.3
  • Emulsion stability in hard water = up to 800 ppm water hardness

I-PRO COA – 3000

An ester-based semi-synthetic additive for semi-synthetic water-soluble oils. manufactured from bio-resistant and bio-stable emulsifiers. fortified with anti-rust, anti-corrosion, anti-foam, antioxidants, metal deactivators, and high-performance functional additives without using chlorinated wax or sulfurized EP additives. This product is available with or without biocides and fungicides. fully meets the requirements of European and American standards It is non-irritant to the skin and eyes. Pl.refer MSDS.

Blending RatioBlend
Emulsifier additive25%
Mineral oil75%
  • Suitable oil: Gp 1 or Gp II SN 70 or Gp 1 SN 150 or a mix of both oils
  • Emulsion white microemulsion
  • The PH of the emulsifier is 10 ± 0.3.
  • PH of the oil emulsion in 1:20 parts D.M water = 9.4 ± 0.2
  • Emulsion stability in hard water = up to 400 ppm of water hardness

I-PRO COA – 4000

Ester-based premium quality semi-synthetic additive for semi-synthetic water-soluble metalworking fluids. manufactured from bio-resistant, bio-stable emulsifiers. Enhanced with anti-rust, anti-corrosion, anti-foam, antioxidants, metal deactivators, and complex ester-based EP additives without using chlorine or sulphur. This product is available with or without biocides free from all banned, listed, or restricted hazardous substances. meets the requirements of European and American standards It is non-irritant to the skin and eyes. Pl.refer MSDS

Blending RatioBlend
Emulsifier additive32.5%
Oil67.5%
  • Suitable oils. Mineral oil SN 70, or SN 150 or a mix of both oils or synthetic oils
  • Emulsion: transparent blueish with microemulsion.
  • The PH of the emulsifier is 10 ± 0.2.
  • PH of the oil emulsion in 1:20 parts D.M water = 9.4 ± 0.2.
  • Emulsion stability in hard water = up to 400 ppm of water hardness

I-PRO COA – 5000

Premium quality multipurpose, versatile, high-performance ester-based semi-synthetic additive blended with nanoparticles to provide multi-functional performance. fortified with anti-rust, anti-corrosion, anti-foam, antioxidants, metal deactivators, and ester-based EP additives without chlorine or sulphurised oils This product is available with or without biocides and fungicides. free from all banned, listed, or restricted substances. contains boron and secondary amine within permitted levels, and considered to be safe as per advisories issued by EU authorities. Conform to EU and US standards. It is non-irritant to the skin and eyes. Pl.refer MSDS

Blending RatioBlend
Emulsifier additive32.5%
Oil67.5%
  • Suitable oils. Mineral oil SN 70 or SN 150 or a blend of both oils or synthetic oils
  • Emulsion: transparent blueish with microemulsion.
  • The PH of the emulsifier is 10 ± 0.2.
  • PH of the oil emulsion in 1:20 parts D.M water = 9.4 ± 0.2
  • Emulsion stability in hard water = up to 400 ppm of water hardness